The STIHL MS 271 is a very high performance mid-range saw suitable for farmers, gardeners or landscapers. This chainsaw is a great all rounder, strong enough to cut down big trees but without the weight you expect of a saw with this power.
Loaded with features like the the pre-separation air filter system which drastically reduces maintenance required. Also equipped with new STIHL 2-MIX engine which gives more power, less fuel consumption and less emissions.
These new features make the new generation saws very economical.
The MS 271 is fitted with a strong .325 grade chain for excellent cutting.
1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.
The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.
All important functions such as start, choke, throttle and stop are operated via a single lever.
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
Technical data | Value |
---|---|
Displacement cm³ | 50.2 |
Power output bhp | 3.5 |
Weight kg 1) | 5.6 |
Power-to-weight ratio kg/kW | 2.2 |
CO2 g/kWh | 826 |
Sound pressure level dB(A) 2) | 103 |
Sound power level dB(A) 2) | 115 |
Vibration values left/right m/s² 3) | 4.5/4.5 |
Tank volume l | 0.50 |
Speed at maximum power Um | 9.500 |
Bumper spike | Steel claw |
Sprocket - number of teeth | 7 Z |
Cylinder | Chrome |
Oil pump | Not adjustable |
Filter | Long-term filter system (pre-separation) / cartridge filter hd2 |
Sprocket | Profile sprocket |
Chain tensioning | Lateral chain tension |
Anti vibration system | Steel spring |
Handle type | Standard grip |
Filler cap | Tool-free filler cap |
Chain pitch | .325" |
EPA Certified fuel consumption glh | 0.375 |
EPA Certified fuel consumption l/h | 1.418 |
Oil tank volume cm3 | 240 |
The STIHL MS 271 is a very high performance mid-range saw suitable for farmers, gardeners or landscapers. This chainsaw is a great all rounder, strong enough to cut down big trees but without the weight you expect of a saw with this power.
Loaded with features like the the pre-separation air filter system which drastically reduces maintenance required. Also equipped with new STIHL 2-MIX engine which gives more power, less fuel consumption and less emissions.
These new features make the new generation saws very economical.
The MS 271 is fitted with a strong .325 grade chain for excellent cutting.
1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.
The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.
All important functions such as start, choke, throttle and stop are operated via a single lever.
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
Technical data | Value |
---|---|
Displacement cm³ | 50.2 |
Power output bhp | 3.5 |
Weight kg 1) | 5.6 |
Power-to-weight ratio kg/kW | 2.2 |
CO2 g/kWh | 826 |
Sound pressure level dB(A) 2) | 103 |
Sound power level dB(A) 2) | 115 |
Vibration values left/right m/s² 3) | 4.5/4.5 |
Tank volume l | 0.50 |
Speed at maximum power Um | 9.500 |
Bumper spike | Steel claw |
Sprocket - number of teeth | 7 Z |
Cylinder | Chrome |
Oil pump | Not adjustable |
Filter | Long-term filter system (pre-separation) / cartridge filter hd2 |
Sprocket | Profile sprocket |
Chain tensioning | Lateral chain tension |
Anti vibration system | Steel spring |
Handle type | Standard grip |
Filler cap | Tool-free filler cap |
Chain pitch | .325" |
EPA Certified fuel consumption glh | 0.375 |
EPA Certified fuel consumption l/h | 1.418 |
Oil tank volume cm3 | 240 |