Our Location
Call +353 (042) 9666 725
FREE NATIONWIDE DELIVERY On All Orders Over €100

STIHL MS 201 Chainsaw

970.00 (inc Vat)
788.62 (exVat)

This product is currently out of stock

Product Description

Light, agile and designed for precision, the upgraded STIHL MS 201 C-M is fitted with the new version of the economic 2-MIX engine, making it ideal for harvesting thin wood, limbing and tending young stands.

The new 2-MIX engine consists of a new cylinder, piston and exhaust as well as an upgrade the M-Tronic system – M-Tronic 3.0. With its compact construction, reduced emissions, efficient engine management system, extremely low weight and fantastic manoeuvrability, it is great to handle while offering impressively high lugging power despite its low weight.

Designed for use in agriculture, forestry, gardening and landscaping operations, this light pro saw provides a high cutting and plunging performance.

Standard features

 
  • Combi leverZoom
    Combi lever

    As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.

  • STIHL M-Tronic (FT)Zoom
    STIHL M-Tronic (FT)

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • Advanced combustion technologyZoom
    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

  • Anti-vibration systemZoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • CompensatorZoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Captive nutsZoom
    Captive nuts

    When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.

  • Variable-displacement oil pumpZoom
    Variable-displacement oil pump

    Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.

  • Single-lever master controlZoom
    Single-lever master control

    All important functions such as start, choke, throttle and stop are operated via a single lever.

     

  • Side chain tensionerZoom
    Side chain tensioner

    The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

  • Ematic chain lubrication systemZoom
    Ematic chain lubrication system

    The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

  • STIHL ElastoStartZoom
    STIHL ElastoStart

    STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

  • Tool free filler capsZoom
    Tool free filler caps

    Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.

echnical data Value
Displacement cm³ 35.2
Power output bhp 2.4
Weight kg 1) 4
Power-to-weight ratio kg/kW 2.2
System weight kg 2) 4.58 / 4.68
Product Description

Light, agile and designed for precision, the upgraded STIHL MS 201 C-M is fitted with the new version of the economic 2-MIX engine, making it ideal for harvesting thin wood, limbing and tending young stands.

The new 2-MIX engine consists of a new cylinder, piston and exhaust as well as an upgrade the M-Tronic system – M-Tronic 3.0. With its compact construction, reduced emissions, efficient engine management system, extremely low weight and fantastic manoeuvrability, it is great to handle while offering impressively high lugging power despite its low weight.

Designed for use in agriculture, forestry, gardening and landscaping operations, this light pro saw provides a high cutting and plunging performance.

Standard features

 
  • Combi leverZoom
    Combi lever

    As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.

  • STIHL M-Tronic (FT)Zoom
    STIHL M-Tronic (FT)

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • Advanced combustion technologyZoom
    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

  • Anti-vibration systemZoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • CompensatorZoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Captive nutsZoom
    Captive nuts

    When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.

  • Variable-displacement oil pumpZoom
    Variable-displacement oil pump

    Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.

  • Single-lever master controlZoom
    Single-lever master control

    All important functions such as start, choke, throttle and stop are operated via a single lever.

     

  • Side chain tensionerZoom
    Side chain tensioner

    The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

  • Ematic chain lubrication systemZoom
    Ematic chain lubrication system

    The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

  • STIHL ElastoStartZoom
    STIHL ElastoStart

    STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

  • Tool free filler capsZoom
    Tool free filler caps

    Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.

echnical data Value
Displacement cm³ 35.2
Power output bhp 2.4
Weight kg 1) 4
Power-to-weight ratio kg/kW 2.2
System weight kg 2) 4.58 / 4.68
Ecommerce Website Design by Dmac Media